Link Station M2. The pdf installation and product manual can be found at http://www.ssddrives.com/usa/doc/HA353686.pdf The LinkStation is a high speed intelligent microprocessor device used for industrial process control applications. It provides a color LCD touch screen interface for LINK control system networks. Using the Windows based graphical software package Drive System Designer (DSD) and appropriate LinkCards, you can configure the L5392 for line sequencing, process control functions, such as draw and loadcell control, and direct control of all motor drive controllers connected to the same LINK control network. NOTE. You must use DSD or ConfigEd version 5 or greater to configure this unit. This module is not compatible with earlier versions. The screen is set up in a six band format, where each band can be software configured with any of the \'LinkStation\' blocks available in DSD. These blocks include meters, potentiometers, combination potmeters, annunciators, pushbuttons and more. The L5392 supports multi-paging. Using the appropriate default configuration in DSD, you can program them to display multiple pages in the standard six band format. Special page handlers and two dedicated buttons allow the user to scroll up and down between pages. The L5392 has four slots for adding various LinkCards. An L5311 RTN LinkCard is required with each unit to communicate with the standard acrylic fiber LINK network and is usually fitted in the leftmost slot. Other LinkCards include analog and digital I/O, DeviceNet, Profibus and more. Detailed information on these LinkCards may be found in individual datasheets. A LinkCard may be fitted in any slot; the site mapping is done in software by the user.EMI shields in the form of blank LinkCards fill the remaining unused slots